STEVAL-IPMNM1S: 60W, 125 ~ 400V, 3-Phase BLDC/PMSM Driver

Summary

The STEVAL-IPMNM1S is a compact motor drive power board based on SLLIMM-Nano SMD (small low-loss intelligent molded module) product (STIPNS1M50T-H). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such as power white goods, air conditioning, compressors, power fans and 3-phase inverters for motor drives in general.

The STEVAL-IPMNM1S itself consists of six MOSFETs, three high voltage half-bridge gate driver ICs and a wide range of features like under voltage lockout, smart shutdown, internal temperature sensor and NTC, overcurrent protection and internal op-amp.

The main characteristics of this evaluation board are small size, minimal BOM and high efficiency. It features an interface circuit (BUS and VCC connectors), bootstrap capacitors, snubber capacitor, hardware short-circuit protection, fault event signal and temperature monitoring. It is designed to work in single- or three-shunt configuration and with triple current sensing options: three dedicated on-board op-amps, op-amps embedded on MCU or single internal IPM op-amp. The Hall/Encoder part completes the circuit.

The system is designed to achieve accurate and fast conditioning of current feedback to satisfy the typical requirements for field-oriented control (FOC).

The STEVAL-IPMNM1S is compatible with ST's control board based on STM32, providing a complete platform for motor control.

Key Features

  • Nominal power: up to 60 W

  • Input auxiliary voltage: up to 20 VDC

  • Single- or three-shunt resistors for current sensing (with sensing network)

  • Three options for current sensing: dedicated external op-amps, internal SLLIMM-Nano SMD op-amp (single) or via MCU

Specifications

Manufacturer STMicroelectronics
Category Motor Control
Eval Board Part Number 497-18327-ND
Eval Board Supplier STMicroelectronics
Eval Board Normally In Stock
Voltage In 125 ~ 400 VDC
Number of Motors and Type 1, 3-Ph BLDC Motor
1, 3-Ph BLDC, Sensorless
1, 3-Ph PMSM Motor
1, 3-Ph PMSM, Sensorlesss
Power / Current Out 600 mA
60 W
Features Current Sensing
Encoder Input
Fault Indication
Hall Input
MCU Controlled
Over Current Protection
Sensorless Control (FOC)
Short Circuit Protection
Shutdown, Enable, Standby
Thermal Protection
Under Voltage Protection, Brown-Out
Component Count + Extras 92 + 71
Application / Target Market HVAC
Motor Control
Pumps
White Goods
Design Author STMicroelectronics
Main I.C. Base Part STIPNS1M50T-H
Date Created By Author 2018-09
Date Added To Library 2019-02

Share This Design

Eval Board

Order a fully assembled board:

Quantity Available: 5

Quantity: