FRDMSTBC-A8491 Quick Reference Datasheet by NXP USA Inc.

Get Started Down‘oad mols and documemahon under Jump-Start Vaur Design at lreescalemaml , . sensortoalbox E'F 2&3 u.w< ”f="" 3-axis="" sensor="" toolbox="" development="" board="" mmab491q="" 3-axis="" multifunction="" digital="" accelerometer="" frdmstbc-a8="" 91="" freescale‘="" vreescalexmm/="" sensonoolhox="" 0"="" x="" freescale"="">
3-Axis Sensor Toolbox Development Board
MMA8491Q 3-axis multifunction digital accelerometer
Quick Reference Card
Get Started
FREESCALE FREEDOM PLATFORM
documentation under
Jump-Start Your Design
at freescale.com/
sensortoolbox
Download tools and
FRDMSTBC-A8491
FRDM
STBC-
A8491
For more information,
visit freescale.com/
sensortoolbox
Freescale and the Freescale logo are
trademarks of Freescale Semiconductor, Inc.,
Reg. U.S. Pat. & Tm. Off. All other product
or service names are the property of their
respective owners.
© 2015 Freescale Semiconductor, Inc.
FRDMSTBCA8491QRC REV 1
920-28977 REV A
FRDM
STBC-
A8491
. Verlty package contents: - FHDMSTac-Aml oevelopment ooam Connect the FRDMSTEC-ABAM development ooaro to e Freesoele Freeoorn development ooaro, such as the FRDM-KLZSZ 101 any Ardmno n3 oompatrole ooarolt Fleler to the Freeecale Freeoorn development ooaro Qulck Start Guroe lor orlver rnlormatlon. Plug one end ol a use cable rnto the SDA port on the assembly. Plug the other eno of the cable min the use port on the oomotrter. Download and lnstall the latest Sensor Tooloox sonwere at: lreemale.comlsensomolbox . Start the Sensor Toolbox software. MMAEABlQ {Laxls mullmmcimn dlgifll acoelemmelev uormsmmammxlasmml s a lzcjcu 5 a lzcjnm IZCjDM a 9 masque m - ,_ CD V 00
Learn more at freescale.com/sensortoolbox
Get to Know the FRDMSTBC-A8491
Test points (8 places)
MMA8491Q 3-axis multifunction digital accelerometer
12 QFN (3 mm x 3 mm x 1.05 mm)
XOUT – 3
5 – I2C_SDA1
4 – VDD
I2C_SDA0 – 9
I2C_SCL0 – 10
6 – I2C_SCL1
2 – VDD
Through hole pins (8 places)
2 – EN
7 – GND
6 – GND
YOUT – 6
ZOUT – 1
Verify package contents:
FRDMSTBC-A8491
development board
Connect the FRDMSTBC-A8491
development board to a Freescale
Freedom development board,
such as the FRDM-KL25Z (or any
Arduino R3 compatible board).
Refer to the Freescale Freedom
development board Quick Start
Guide for driver information.
Plug one end of a USB cable into
the SDA port on the assembly.
Plug the other end of the cable into
the USB port on the computer.
Download and install the
latest Sensor Toolbox software at:
freescale.com/sensortoolbox
Start the Sensor Toolbox software.
1
2
3
4
5