DC823B-B: 0.6 ~ 5V @ 10A, 4.5 ~ 28V in

Summary

Demonstration circuit DC823B-B features the LTM®4600HVEV, a 10A high efficiency, high density switch mode step-down power module.

The input voltage is from 4.5V to 28V.
The output voltage is programmable from 0.6V to 5V. The rated load current is 10A, while derating is necessary for different VIN, VOUT, and thermal conditions.
Integrated input and output filters enable a simple PCB layout.
Only bulk input and output capacitors are needed.

The LTM4600HV data sheet must be read in conjunction with this demo manual prior to working on or modifying demo circuit DC823B-B.

Manufacturer	Analog Devices Inc.
Category	AC/DC and DC/DC Conversion
Sub-Category	DC/DC SMPS - Single Output
Eval Board Part Number	DC823B-B-ND
Eval Board Supplier	Analog Devices Inc.
Eval Board	Normally In Stock
Topology	Step Down
Outputs and Type	1 Non-Isolated
Voltage Out: Factory Set	0.6 V 1.2 V 1.5 V 1.8 V 2.5 V 3.3 V 5 V
Current Out	10 A
Voltage In	4.5 ~ 28 V
Efficiency @ Conditions	>85%, 12V in, 5V @ 2 ~ 10 A >85%, 12V in, 3.3V @ 2 ~ 10 A >82%, 24V in, 5V @ 2 ~ 10 A >80%, 24V in, 3.3V @ 2.5 ~ 10 A >80%, 12V in, 1.5V @ 3 ~ 10 A >77%, 12V in, 1.2V @ 3 ~ 10 A >72%, 24V in, 1.5V @ 1.7 ~ 10 A
Voltage Out Range	0.6 ~ 5 V
Features	Over Current Protection Over Voltage Protection Power Good Output Short Circuit Protection Soft Start
Switching Frequency	850 kHz
Standby Current [Typical]	35 µA
Quiescent Current [Typical]	36 mA
Component Count + Extras	10 + 47
Internal Switch	Yes
Design Author	Linear Technology
Application / Target Market	Avionic Military Point of Load (PoL) Servers Telecom
Standby Current [Maximum]	75 µA
Quiescent Current [Maximum]
Main I.C. Base Part	LTM4600HV
Date Created By Author	2004-08
Date Added To Library	2011-03