Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
How to make a Dice Tower from Finnboard
2026-04-30 | By Kitronik Maker
License: See Original Project
Courtesy of Kitronik Maker
Guide by Kitronik Maker
Board game nerds rejoice! This beautifully simple laser cut project uses only one material and is an extremely buildable and customisable project that is easy to add your own style to.
Read on and get ready to roll some dice! Use Emma’s design or modify it to better suit your needs.
We Have Used:
Finnboard.
PVA Glue.
1 Check out the dxf:
All parts of this make are cut from one material – we’ve used Finnboard, but you can use any 3mm thick material of your choice.
2 Begin glueing on one side:
Lay one of the curved side pieces flat and grab the three internal panels – these are called baffles! Glue them in place using PVA as shown.
3 Add the front, back, and bottom of the tower:
As shown, glue the next three panels in place.
4 Now glue on the second side and the tray front:
Now that the other panels are in place, the last two can be glued as shown.
You’re done – let’s roll!
